Clutch Alignments Tools / Shop - Page 2 - Extreame Savings! Save up to 43%

On the LS engine, the oil pan is a stressed member and adds to block rigidity. For this reason, it can't simply be slapped in place; along with the front and rear engine covers, it must be carefully aligned with the block. Proudly made in the USA from a solid piece of 6061-T6 aircraft grade aluminum. This tool will align the front cover to make sure the front main seal is installed correctly.Aligns the front cover so that the front main seal is centered. Fits all LS Series engines. LS1, LS2, LS3

The OTC 4980 establishes correct clutch offset and alignment on Polaris P85 Clutches. Similar to Polaris # 2870426.Establishes correct clutch offset and alignment on Polaris P85 Clutches. Similar to Polaris # 2870426.

AHBMW 400 Features: -Fits over square on back of camshafts. -For setting camshaft timing. -Camshaft Alignment Tool. -Made in the U.S.A. Product Type: -Tools. Use: -Camshaft. Quantity: -Set. Dimensions: Overall Height - Top to Bottom: -2.2 Inches. Overall Width - Side to Side: -2.2 Inches. Overall Depth - Front to Back: -2.2 Inches. Overall Product Weight: -4.1 Pounds.ncludes 2 blocks, swivel lock and locking pin.. For setting camshaft timing. Comparable to BMW tool numbers 113240 and 112300.. Ap

AM-303-1550 Crankshaft Vibration Dampener Alignment Tool Same as 999-7431 AG-1211 Application: 1.6L Engine Engine - 1.6L EcoBoost (110kW/150PS) - Sigma/1.6L EcoBoost (132kW/180PS) - Sigma : Focus : 2010 Engine - 1.6L EcoBoost (110kW/150PS) - Sigma/1.6L EcoBoost (132kW/180PS) - Sigma : Focus : 2011 Engine - 1.6L EcoBoost (110kW/150PS) - Sigma/1.6L EcoBoost (132kW/180PS) - Sigma : C-Max : 2011 Engine - 1.6L EcoBoost (110kW/150PS) - Sigma/1.6L EcoBoost (132kW/180PS) - Sigma : Focus : 2012 Engine -

On the LS engine, the oil pan is a stressed member and adds to block rigidity. For this reason, it can't simply be slapped in place; along with the front and rear engine covers, it must be carefully aligned with the block. Proudly made in the USA from a solid piece of 6061-T6 aircraft grade aluminum. This tool will align the rear cover to make sure the real main seal is installed correctly.Aligns the rear cover so that the rear main seal is centered when installed. Fits all LS Series engines. LS

Universal Pulley holders are designed to fit many different sized pulleys having slots or holes, such as camshaft pulleys or crankshaft pulleys. Technician can hold the Pulley when tightening or loosening the retaining bolts.Fits many different fan clutches, cam and crank pulleys with slots or holes. Adjustable diameter: 1-1/2'' - 8-5/8''. Four different size step pins: 6-10mm, 8-11mm, 10-12mm, 11-16mm. Enables technician to easily hold the pulley when tightening or loosening retaining Bolts,.

The OTC 4978 establishes correct clutch offset and alignment on Polaris EBS Clutches. Similar to Polaris # 2872292.Establishes correct clutch offset and alignment on Polaris EBS Clutches. Similar to Polaris # 2872292.

One New Aftermarket Replacement Clutch Alignment Tool made to fit Kubota Tractor Models: L2050, L2050DT, L225, L2250, L2250DT, L235, L2350, L2350DT, L235DT, L245, L245DT, L245H, L2500, L2500DT, L2550, L2550 TOW, L2550DT, L2550GSTDT, L260, L2602DT, L2650GSTDT, L275, L275DT, L285P, L285WP, L295, L295DT, L3000, L3000DTDimensions:Pilot Diameter: .590''Spline: 1'' 10 SplineReplaces Part Number: CLJ20-0013, 8301772

Features:Checks alignment of Big Twin transmission shifter forks and transmission gearsA must have tool for proper shifter clutch alignment and gear dog engagementSpecs:Item Weight: 1.8 PoundsHeight: 3.30 inchesLength: 7.70 inchesWidth: 4.60 inchesChecks alignment of Big Twin transmission shifter forks and transmission gears. A must have tool for proper shifter clutch alignment and gear dog engagementThis product can be used withModelPart #Harley-Davidson Big Twin H-D#96384-39 37-Early 79SFATHD-

High performance Kobalt 80 volt MAX Li-ion battery delivers fade-free power with no memory loss after chargingCompatible with all the Kobalt 80 volt MAX outdoor power equipment. Fuel gauge provides an easy check on available power level. 6.0 Ah capacity provides extended runtime to help complete any job.

Made to be the most reliable tools in the market today. Tool solutions for most all situations. Built to exceed tool standards. Tool set for removing threaded-on viscous fan clutches. Includes smaller spanner-type wrenches for engaging the hex nut on the fan clutch. Includes larger square drive tools to hold the water pump output shaft stationary. For use on ford, jeep and some imported vehicles. Kit 60 includes 10-Piece for removing threaded-on viscous fan clutches.

This set allows for easy removal of fan clutches when repairing or replacing water pumps, timing chains or fan clutch. Also useful when installing or removing engines, and for a variety of other engine service projects. Hold the fan clutch with the clutch holding tool while using the correct wrench to turn the fan clutch nut (Please note: Be sure to check your automobiles owner's manual for right or left hand thread). Square drives designed for use with a breaker bar for additional torque. For u

Special designed to disassembly dry transmission and align the twin-clutchto change the oil seal
 ·Applicable: VOLVO, FORD,transmission DPS6.
· FM number: 307675.
INSTRUCTION Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.Special designed to disassembly dry transmission and align the twin-clutchto change the oil seal
. ·Applicable: VOLVO, FORD,transmission DPS6. FM number: 307675.
INSTRUCTION. Insta

One New Aftermarket Replacement Clutch Alignment Tool made to fit Various Ford / New Holland Tractor Models.Dual Stage, 1 1/8'' x 21 splines, 1 3/4'' x 25 splines.Replaces Part Number: 83AT009