Milwaukee 48-22-3070 6 in 1 Combination Needle Nose Electrician's Pliers for Non-Metallic Wire w/ Onboard Bolt Cutting and Pipe Reaming Design

If you’re an electrician, you won’t want to leave home without these 6-in-1 pliers from Milwaukee. These needle nose, wire stripping, bolt cutting pliers have almost everything you would need to work with wire, cable, and piping on the job. The head of the unit can ream out 1/2" or 1” piping, prepping it for plumbing or wiring. You can pull wire through conduit or loop it with the needle nose head. The main section of these pliers is devoted to stripping wire, of which you can tackle the more common sizes (8-18 solid and 10-20 stranded). #6 and #8 bolts can be cut with the blade in the center of the unit, and thicker gauged wire can be sliced with the curved blade directly in front of the handle. Even the handle is specially designed. It has a notched rubber molding that gives you an easier grip in difficult, slippery conditions. When not in use, you can keep these locked shut for your own safety. Whether you’re stripping wire to set up a network, cutting bolts to keep things grounded, yanking wire through conduit, or preparing plumbing, this set of pliers can do it all. With all of this utility, no wonder it’s Milwaukee.

Klein Tools is known world wide for the quality of its pliers. These high-leverage Side-Cutting pliers are also designed for heavy-duty cutting. They can cut ACSR, screws, nails, and most hardened wire. The high-leverage design gives these pliers 46%...

Side Cutting Pliers 5.1/2'' tapered head with fine bevel - Powerful Construction with double leaf springs and comfortable dual-compound thermoplastic grips.► MADE IN GERMANY - SOLINGEN. ► Box Joint | Hot Drop Forget Blanks. ► DIN ISO 9654 - Hig...

Klein Tools tools D213-9NETP 9-inch high leverage side cutting fish tape pulling plierHigh-leverage design has 46-percent more cutting power. Built-in channel pulls 1/8-Inch or 1/4-Inch (3 or 6 mm) flat steel fish tape without damaging the tape. Stre...

Diagonal flush cutters-85-Degree angle.Style 2: 85-Degree angled blades. Cutting face flush ground. Non-beveled, for flush cutting sprues off plastic components or soft materials such as lead. With opening spring.